5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 325
Enters the next lower level.
Exits to the config alarm level.
Enters the next lower level.
Enters the next lower level.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Enters the next lower level.
Stores the current configuration in permanent memory.
packing (tunnel-packing:4) level commands
Sets to default packing mode, which is 'Disable'
Removes the send character for packing mode.
Restores the default threshold.
Restores the default packing mode timeout.
Returns to the tunnel level.
Removes the trailing character for packing mode.
Disables packing. Data is sent to the network when received.
packing mode send
character
Sets packing mode to accumulate data and transmit it upon receiving the configured send
character on the line (serial port).
Sets packing mode to accumulate data and transmit it after a specified amount of time
(timeout).
Sets the send character for packing mode. The character may be input as text, control,
decimal, or hex. A control character has the form <control>C. A decimal value character
has the form \99. A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the threshold (byte count). If the queued data reaches this threshold then the data will
be sent. <bytes> = number of bytes in the threshold.
Sets the timeout value for packing mode in milliseconds. <milliseconds> = timeout value, in
milliseconds.
trailing character <con-
trol>
Sets the trailing character for packing mode. The character may be input as text, control,
decimal, or hex. A control character has the form <control>C. A decimal value character
has the form \99. A hex value character has the form 0xFF.
Stores the current configuration in permanent memory.
packing (tunnel-packing:3) level commands
Sets to default packing mode, which is 'Disable'
Removes the send character for packing mode.
Restores the default threshold.
Restores the default packing mode timeout.
Returns to the tunnel level.
Removes the trailing character for packing mode.
Disables packing. Data is sent to the network when received.
packing mode send
character
Sets packing mode to accumulate data and transmit it upon receiving the configured send
character on the line (serial port).
Sets packing mode to accumulate data and transmit it after a specified amount of time