Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 340
default minutes
Restores the default minutes on the hour for reboot schedule.
default schedule
Restores the default reboot schedule type.
default unit
Restores the default reboot schedule interval unit.
exit
Returns to the previous level.
hours <hours>
Sets the hour of day for reboot schedule (Use 24h time).
interval <number>
Sets the reboot schedule interval
minutes <minutes>
Sets the minutes on the hour for reboot schedule.
schedule daily
Sets the reboot schedule type to 'daily'.
schedule interval
Sets the reboot schedule type to 'interval'.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables scheduled reboots.
state enable
Enables scheduled reboots.
unit days
Sets the reboot schedule interval to days.
unit hours
Sets the reboot schedule interval to hours.
unit months
Sets the reboot schedule interval to months.
unit weeks
Sets the reboot schedule interval to weeks.
write
Stores the current configuration in permanent memory.
root level commands
enable
Enters the enable level.
exit
Exit from the system
iperf <params>
Run iperf with command line parameters passed in quoted string.
ping <host>
Ping destination continuously with 5 second timeout
ping <host> <count>
Ping destination n times with 5 second timeout
ping <host> <count>
<timeout>
Ping destination n times with x timeout (in seconds)
ping6 <host>
Ping destination continuously with 5 second timeout
ping6 <host> <count>
Ping destination n times with 5 second timeout
ping6 <host> <count>
<timeout>
Ping destination n times with x timeout (in seconds)
show
Show system information
show history
Displays the last 20 commands entered during the current CLI session.
show lines
Show line information
show multicast routes
show state of VIFs and multicast routing tables
show routes
show system routing table
show rules
show system rules
tcpdump <parameters>
dump traffic on a network
trace route <host>
Trace route to destination
trace route <host> <pro-
tocol>
Trace route to destination using TCP, ICMP, or UDP
rss (config-rss) level commands
clear rss
Clear the RSS Feed data
clrscrn
Clears the screen.
default max entries
Restores the default number of RSS feed entries.
exit
Exits to the configuration level.

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm