Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 344
default scan interval
Restores the default scan interval based on current roaming level.
default scan threshold
2.4ghz
Restores the default Threshold value for 2.4GHz band based on current roaming level.
default scan threshold
5ghz
Restores the default Threshold value for 5GHz band based on current roaming level.
exit
Exit back to interface configuration level
level custom
Sets the roaming level to Custom.
level high
Sets the roaming level to High.
level low
Sets the roaming level to Low.
level medium
Sets the roaming level to Medium.
roaming disable
Disables Smart Roaming.
roaming enable
Enables Smart Roaming.
rssi delta 2.4ghz <dBm>
Sets the RSSI Delta value for 2.4GHz band.
rssi delta 5ghz <dBm>
Sets the RSSI Delta value for 5GHz band.
scan interval <seconds>
Sets the scan interval.
scan threshold 2.4ghz
<text>
Sets the Threshold value for 2.4GHz band.
scan threshold 5ghz
<text>
Sets the Threshold value for 5GHz Band.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
write
Stores the current configuration in permanent memory.
smtp (config-smtp) level commands
clrscrn
Clears the screen.
default local port
Clears the local port for SMTP client.
default server port
Restores the SMTP server port to its default.
exit
Exits to the configuration level.
from address <text>
Sets the From address for email alerts. <text> = email address to place in the From field of
the email alert.
local port <number>
Sets the local port for SMTP client.
no from address
Removes the From address for email alerts.
no overriding domain
Removes the overriding domain name option.
no password
Removes the password.
no server address
Removes the SMTP server address.
no username
Removes the username.
overriding domain <text>
Sets a domain name that will be used when connecting to an SMTP server to send an
email alert instead of the device domain name in EHLO. <text> = domain name to override
the current domain name in EHLO.
password <text>
Sets the password for logging in to the mail server.
server address <text>
Sets an SMTP server address to direct all outbound email messages through a mail serv-
er.
server port <number>
Sets the SMTP server port.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
username <text>
Sets the username for logging in to the mail server.
write
Stores the current configuration in permanent memory.
snmp (config-snmp) level commands

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm