Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 366
state enable
Enables Virtual IP instance.
write
Stores the current configuration in permanent memory.
virtual ip 2 (config-virtual-interface:2) level commands
clrscrn
Clears the screen.
exit
Exits to the config-gateway level.
ip address <text>
Sets the Virtual IP address.
lan ip address <text>
Sets the LAN IP address.
name <text>
Sets the name. <text> = name.
no ip address
Clears the Virtual IP address.
no lan ip address
Clears the LAN IP address.
no name
Clears the name.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables Virtual IP instance.
state enable
Enables Virtual IP instance.
write
Stores the current configuration in permanent memory.
virtual ip 3 (config-virtual-interface:3) level commands
clrscrn
Clears the screen.
exit
Exits to the config-gateway level.
ip address <text>
Sets the Virtual IP address.
lan ip address <text>
Sets the LAN IP address.
name <text>
Sets the name. <text> = name.
no ip address
Clears the Virtual IP address.
no lan ip address
Clears the LAN IP address.
no name
Clears the name.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables Virtual IP instance.
state enable
Enables Virtual IP instance.
write
Stores the current configuration in permanent memory.
vpn 1 (config-vpn:1) level commands
aggressive mode disable
Disables aggressive mode.
aggressive mode enable
Enables aggressive mode.
authentication mode psk
Sets the authentication mode to PSK.
authentication mode rsa
Sets the authentication mode to RSA.
authentication mode
xauth
Sets the authentication mode to XAUTH.
clrscrn
Clears the screen.
connection name <text>
Sets the name. <text> = name.
connection type host to
host
Sets the connection type to Host to Host.
connection type host to
subnet
Sets the connection type to Host to Subnet.
create new local rsa key
Create new Local RSA key
default authentication
mode
Restores the default authentication mode.

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm