5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 367
Restores the default connection type.
default esp authentica-
tion
Restores the default ESP authentication.
Restores the default ESP DH Group.
Restores the default ESP encryption.
default ike authentication
Restores the default IKE authentication.
Restores the default IKE DH Group.
Restores the default IKE encryption.
Restores the default IKE lifetime.
Restores the default IKEv2 setting (Permit).
Restores the default interface.
Restores the default local RSA key length.
Restores the default remote peer type.
Restores the default SA lifetime.
Restores the default transport type.
Sets ESP authentication to any.
Sets ESP authentication to MD5.
Sets ESP authentication to SHA1.
Sets ESP authentication to SHA2.
Sets ESP DH Group to any.
Sets ESP DH Group to DH1.
Sets ESP DH Group to DH14.
Sets ESP DH Group to DH2.
Sets ESP DH Group to DH5.
Sets ESP encryption to 3DES.
Sets ESP encryption to AES-128.
Sets ESP encryption to AES-256.
Sets ESP encryption to any.
Sets ESP encryption to DES.
Exits to the config level.
Sets IKE authentication to any.
Sets IKE authentication to MD5.
Sets IKE authentication to SHA1.
Sets IKE authentication to SHA2.
Sets IKE DH Group to any.
Sets IKE DH Group to DH1.
Sets IKE DH Group to DH14.
Sets IKE DH Group to DH2.
Sets IKE DH Group to DH5.
Sets IKE encryption to 3DES.
Sets IKE encryption to AES-128.
Sets IKE encryption to AES-256.
Sets IKE encryption to any.
Sets IKE encryption to DES.