5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 371
Sets the IEEE 802.1x protocol to FAST.
Sets the IEEE 802.1x protocol to LEAP.
Sets the IEEE 802.1x protocol to PEAP.
Selects the RSA certificate by configured name.
Sets WPAx key. Each byte is represented by two adjacent hex digits. Bytes may run to-
gether or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc
12:3a:bc Note that quotes must enclose the value if it contains spaces.
Sets WPAx key. Each byte is represented by a single character. Note that quotes must
enclose the value if it contains spaces.
Clears the RSA certificate name.
Clears the RSA certificate name.
Sets the value for the password. <text> = put quotes around the characters (max 63).
Sets the PEAP authentication protocol option to EAP-MD5.
Sets the PEAP authentication protocol option to EAP-MSCHAP V2.
Sets the PEAP authentication protocol option to EAP-TLS.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the value of the username. <text> = value in characters (max 63).
validate certificate disa-
ble
Server certificate will not be verified.
validate certificate enable
Server certificate will be verified.
Stores the current configuration in permanent memory.
Exits to the enable level.
Dump JSON Status Records to the console
Dump specified JSON Status Records to the console
Save JSON Status Record to a file
jsr export <file> <group
list>
Save specified JSON Status Record to a local file
List JSON Status Record groups to the console
jsr metadata dump
<group list>
Dump specified JSON Status Records with metadata to the console
jsr metadata export <file>
Save JSON Status Record to a file
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Dump XML configuration to the console
Dump specified XML configuration to the console
Save XML configuration to a file
Save specified XML configuration to a local file