Need help?Do you have a question about the Lanzar 15 and is the answer not in the manual?
General| Brand | Lanzar |
|---|---|
| Model | 15 |
| Category | Stereo Equalizer |
| Language | English |
Controls balance between front and rear outputs, takes priority over head unit.
15 band controls per channel for boost/cut at specific frequencies.
Separate level adjustments for front, rear, and line outputs.
Toggles the equalizer function on or off for signal processing.
Connects to head unit RCA outputs for audio signal input.
Connects to amplifier inputs for front and rear speakers.
Connects to other signal processor devices.
Indicates when the internal power supply is active and the unit is operational.
Connects head unit outputs to E-15 for standard 4-channel system configuration.
Uses two E-15 units with 4 RCA inputs for enhanced stereo control.
Uses two E-15 units with 2 RCA inputs via Y-adapters for stereo control.
Connects to head unit speaker outputs via a high/low adapter for OEM radios.
Safety and preparatory advice before mounting and wiring the equalizer.
Step-by-step guide for physically installing the E-15 unit in a vehicle.
Steps to check for unwanted noise in the audio system before final mounting.
Preliminary adjustments and tuning for optimal audio system performance.
To Next Page
