Contact information
E8000 tech specs
Frame T6 heat-treated, 7005 aluminium designed for Shimano STePS e8000 motor.
Fork Chromoly steel with tapered steerer tube.
Kickstand Aluminium with replaceable feet.
Headset 1⅛” FSA Orbit XII , 1½” tapered 1⅛” .
Steerer arm Chromoly steel with machined fittings and rubber covered balljoint.
Dropouts Aluminium,machined and replaceable.
Shimano STePS system
Motor Bottom bracket mounted for low centre of gravity and light; 2.8kg. 250W/70Nm Torque max output.
Battery: High capacity, 504Wh and low charging time of 4 hours; 2.62kg.
Crankset: Hollowtech II style, 38 tooth chaining.
Shifter: XT di2
Rear Derailleur: XT di2
Front wheel: Novatec hub, sealed bearings, 10mm axle, laced to Alex 36H Supra rim.
Rear wheel: Novatec hub laced to Alex 36H Supra rim.
Cassette: Shimano XT 11-42
Tyres: Schwalbe Kojak 20” x 1.35’, 26” x 1.35’,
extra set, Schwalbe Marathon Supreme 20” x 1.6’, 26” x 1.6’
Fenders: Plastic, black.
Brakes: Shimano Zee 4-pot disc brakes , 180mm Shimano rotors
Handlebar: Thomson Trail, 750mm, 31.6 mm alloy riser bar, black.
Stem: Thomson X4 50mm, black.
Stemlifter: EasyUp 100mm of adjustment, black.
Grips: Velo Ergo lock-on.
Bell: Brass Japanese Wind Bell, black.
Saddle: Original Bullitt Racing Seat from Velo, black.
Seatpost: 31.6 mm alloy, 410mm, black.
Seat clamp: Thomson, fixed.
Front lights: Busch Müller Lumotec IQ2 Eyc powered from main Shimano battery.
Rear lights: Busch Müller Secula powered from main Shimano battery.
Chain: KMC
Lock: ABUS Amparo, ABUS Key Alike© integration with STePS battery.
www.larryvsharry.com
HQ – Larry vs Harry, Esromgade 15, opg. 2 (rampen), DK–2200 Copenhagen
Bullitt Store – Frederiksborggade 43, DK–1361 Copenhagen Denmark
Ebullitt_manual_2017.pdf 1 19/09/2017 12.41
To Next Page
Need help?
General
