Lascal buggy board mini - Tightening the Connectors; The Arms; Rotating the Arms; Positioning and Choosing Cotter Pins

Secure the Connector by turning the
Connector Bolt clockwise. Check that the
stroller still folds properly and the brakes still
work properly; if not, you may need to
reposition the Connectors.
The Connectors must be firmly attached to
the stroller such that they cannot move.
(To detach the Connector. Turn anti clockwise
until the Connector come loose)
3. Tightening the Connectors.
4. Rotating the Arms forward.
5. Positioning the Cotter Pins.
6. Choosing the right Cotter Pin hole.
7. Connecting the BuggyBoard
™.
3
4
6
7
5
- 4 -
EN