Laser Performance Pico - Page 4

Your Pico comes in the following main
component parts:
Pico Rope Pack (Supplied as part of foil kit)
1. Dagger board shock cord – Blue (5mm x 1.2m)
2. Clew outhaul shock cord – Blue (5mm x 1.1m)
3. Vang/kicking strap rope primary – Pre/s Black
(5mm x 1m)
4. Vang/kicking strap control line – Pre/s Black
(5mm x 2.3m)
4. Clew tie down - Pre/s Blue (4mm x 0.35m)
5. Traveller - Pre/s Blue (6mm x 1.2m)
6. Jib halyard - Pre/s Blue (4mm x 5m)
7. Outhaul control line - Pre/s Blue (4mm x 3.65m)
8. Cunningham control line - Pre/s Yellow
(4mm x 1.25m)
9. Jib sheet – Yellow (7mm x 6m)
10. Mainsheet – Blue (7mm x 10m)
Pico Blocks and Fittings
(Supplied as part of foil kit)
1. Vang lower block inc. hook x1
2. Vang upper blocks x2
3. Large traveller/block inc.
sister clip x1
4. Small traveller block inc.
sister clip x1
5. Twisted hook for clew outhaul x1
6. Loose sister clips x4
7. Rigging link x1
8. Jib tack snap hook for x1
Useful
knots
to know
CLEAT CLOVE HITCHBOWLINESQUARE KNOTFIGURE 8 OR
STOPPER KNOT
1
6
2
7
3
8
4
5