LASER TOOLS Cam Belt Tensioner Gauge
3
The electronic belt tension gauge can be used to measure
and adjust the tension of timing and auxiliary belts fitted to
motor vehicles and other machines.
Tension can be displayed in a variety of standard and
manufacturers’ units. Tension limits can be programmed into
the instrument, either manually or automatically.
During belt tension measurement and adjustment, the belt
tension is displayed. A visual and audible indication of
whether the tension is within or outside the set limits is also
given. This avoids the user having to read the display whilst
adjusting the belt.
The selected tension limits, measurement units and calibration
parameters are stored in a non-volatile memory, and will be
remembered even when the instrument is switched off and
the batteries removed.
Note: Tension checking should always be carried out in
accordance with the vehicle manufacturers’ instructions.
BMW | FORD | ROVER | SEAT | VAG | VAUXHALL | VOLVO
KILOGRAMS | LOWENER | NEWTONS | PEISELER
POUNDS | SEEM
Introduction
Measurement Units
CCoonntteennttss
Introduction Page 3
Principle of operation Page 4
Controls and indicators Page 4
Precautions Page 5
Operation Page 5
Getting the best results Page 8
Menus Page 8
Calibration Page 9
Auto power off Page 10
Low battery warning Page 10
Maintenance Page 10
Warranty procedure Page 10
Specification Page 11
To Next Page
Loading...
Need help?
General
