Laser Impala - User Manual

To Next Page

Thank you for choosing the Lazer

helmet. You have made an excellent

choice that will help to reinforce your

safety while cycling: the sport for which

this helmet has been designed. Lazer

helmets conform to the strict criteria of

international standards.

Wearing a helmet may reduce the

seriousness of injuries to the head that

may occur during a sports accident. For

this reason, it is important to use this

protective gear properly.

Instructions for use and care

1) No helmet can protect the wearer

against all possible impacts.

2) The helmet is designed to be retained by

a strap under the lower jaw.

3) To be eective, a helmet must t and

be worn correctly. To check for correct

t, place helmet on head and make any

adjustments indicated. Securely fasten

retention system. Grasp the helmet and try

to rotate it to the front and rear. A correctly

tted helmet should be comfortable and

should not move forward to obscure vision

or rearward to expose the forehead.

4) No attachments should be made to the

helmet except those recommended by the

helmet manufacturer.

5) The helmet is designed to absorb shock

by partial destruction of the shell and liner.

This damage may not be visible. Therefore,

if subjected to a severe blow, the helmet

should be destroyed and replaced even if it

appears undamaged.

6) The helmet may be damaged and

rendered ineective by petroleum and

petroleum products, cleaning agents,

paints, adhesives and the like, without the

damage being visible to the user.

7) A helmet has a limited lifespan in use

and should be replaced when it shows

obvious signs of wear.

8) This helmet should not be used by

children while climbing or doing other

activities where there is a risk of hanging or

strangulation if the child gets trapped whilst

wearing the helmet.

9) This helmet is designed only for the

following activity: cycling, roller skate,

skateboard. It is not designed to be used

with mopeds or any other type of sport,

mechanical or not.

The Lazer Impala helmet comes with

an action camera mount, suitable for

attaching a camera or lights with a

standard GoPro mounting system.

To attach the action camera mount to

the helmet:

1) Position the mount on the center

vent hole second from the front with

the arrow on the bottom of the mount

facing forward (as shown in diagram

1A).

2) Take one Velcro strap, feed it

through the center vent hole second

from the front, then back up through

the next vent hole (as shown in

diagram 1B).

3) Then feed the strap back through

the mount, double back and fasten

Velcro pads (as shown in diagram 1C).

4) Repeat steps 1-3 for the other side.

Forward facing

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

1. How to install the action camera mount

IMPAL A

1. How to install the action camera mount

IMPAL A

1A) 1C)

1B)

Lamorinièrestraat 33-37

2018 Antwerp - Belgium

www.lazersport.com

For other and more helmet

instructions, please refer to

the owner manual included

with the helmet.

Need help?

Do you have a question about the Laser Impala and is the answer not in the manual?

Summary

How to Install the Action Camera Mount

Mounting Procedure

Step-by-step guide to attaching the action camera mount to the helmet using Velcro straps.

Helmet Safety and Care Instructions

Proper Fit and Security

Ensuring correct helmet fit and secure retention for optimal safety and protection.

Damage, Maintenance, and Lifespan

Guidelines on helmet damage identification, chemical effects, and replacement based on wear.

Approved Usage and Restrictions

Information on activities the helmet is designed for and specific usage limitations.

How to Use the Adjustable Visor

Visor Adjustment Steps

Instructions for loosening, positioning, and re-tightening the helmet visor.

Summary

How to Install the Action Camera Mount

Mounting Procedure

Step-by-step guide to attaching the action camera mount to the helmet using Velcro straps.

Helmet Safety and Care Instructions

Proper Fit and Security

Ensuring correct helmet fit and secure retention for optimal safety and protection.

Damage, Maintenance, and Lifespan

Guidelines on helmet damage identification, chemical effects, and replacement based on wear.

Approved Usage and Restrictions

Information on activities the helmet is designed for and specific usage limitations.

How to Use the Adjustable Visor

Visor Adjustment Steps

Instructions for loosening, positioning, and re-tightening the helmet visor.

The Lazer Impala helmet is a protective gear designed for cycling, roller skating, and skateboarding, conforming to strict international safety standards. It features an action camera mount and an adjustable visor, enhancing its functionality and user experience.

Function Description:

The primary function of the Lazer Impala helmet is to provide head protection during sports activities such as cycling, roller skating, and skateboarding. It is designed to absorb shock through the partial destruction of its shell and liner in the event of an impact, thereby reducing the seriousness of head injuries. The helmet is retained by a strap under the lower jaw, ensuring it stays securely in place during use.

Important Technical Specifications:

While specific material compositions are not detailed, the helmet's design emphasizes shock absorption through its shell and liner. It is designed to fit correctly and comfortably, allowing for adjustments to ensure proper positioning without obstructing vision or exposing the forehead. The helmet is not intended for use with mopeds or any other type of motorized sport.

Usage Features:

Action Camera Mount Installation:

The helmet comes with an action camera mount compatible with standard GoPro mounting systems, allowing users to attach cameras or lights.

Positioning: The mount is positioned on the center vent hole, second from the front, with an arrow on the bottom of the mount facing forward.
First Strap Insertion: A Velcro strap is fed through the center vent hole, second from the front, and then back up through the next vent hole.
Strap Fastening: The strap is then fed back through the mount, doubled back, and the Velcro pads are fastened.
Repeat for Other Side: Steps 1-3 are repeated for the other side to secure the mount.

Adjustable Visor:

The Impala helmet features an adjustable visor that can be set in three different positions, allowing users to customize it based on their preference.

Loosening the Visor: To adjust the visor, the visor bolts are loosened by turning them counter-clockwise. This can be done using a small coin, a large flat-head screwdriver, or a similar blunt object.
Positioning the Visor: Once loosened, the visor can be moved to the desired position.
Tightening the Visor: After positioning, the bolts are re-tightened by turning them clockwise to secure the visor.

General Use and Safety Guidelines:

Impact Protection: The helmet is designed to reduce the seriousness of injuries but cannot protect against all possible impacts.
Correct Fit: For effectiveness, the helmet must fit correctly and be worn properly. Users should place the helmet on their head, make any necessary adjustments, and securely fasten the retention system. The helmet should be comfortable and should not move forward to obscure vision or backward to expose the forehead when grasped and rotated.
Attachments: No attachments should be made to the helmet unless recommended by the helmet manufacturer.
Damage: If the helmet is subjected to a severe blow, it should be destroyed and replaced, even if visible damage is not apparent, as its shock-absorbing capability may be compromised.
Chemical Exposure: The helmet may be damaged and rendered ineffective by petroleum products, cleaning agents, paints, adhesives, and similar substances, even if the damage is not visible to the user.
Lifespan: The helmet has a limited lifespan and should be replaced when it shows obvious signs of wear.
Child Safety: This helmet should not be used by children while climbing or engaging in other activities where there is a risk of hanging or strangulation if the child gets trapped while wearing the helmet.
Intended Use: The helmet is specifically designed for cycling, roller skating, and skateboarding.

Maintenance Features:

The manual implicitly suggests that the helmet's effectiveness can be compromised by certain substances, indicating that care should be taken to avoid exposure to petroleum and petroleum products, cleaning agents, paints, and adhesives. While explicit cleaning instructions are not provided, the emphasis on avoiding damaging substances implies a need for careful maintenance to preserve the helmet's integrity and protective capabilities. Regular inspection for signs of wear is also recommended, prompting replacement when necessary. For more detailed maintenance instructions, users are directed to refer to the owner's manual included with the helmet.

Laser Impala Specifications

General

Brand	Laser
Model	Impala
Category	Motorcycle Accessories
Language	English