BatteryCheck
05
1a
1b
2a 2b
3
GB
Read the operating instructions and the enclosed brochure
„Guarantee and additional notices“ completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
!
Function / Application
This battery tester is used to check all commonly used batteries
(AA / AAA / C / D / 9V / 1.5V button cells). The battery charge level
is shown on a clear 3-colour scale. Operates without a power supply.
Battery holder:
Button cell (1.5V) /
Micro AAA / Mignon AA /
Baby C / Mono D
Negative pole, battery holder
Positive pole, battery holder
Battery holder:
9V block
Negative pole, battery holder
Positive pole, battery holder
3-colour display scale
green: good
orange: weak
red: replace
1
1a
1b
2
2a
2b
3
Safety information
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The tester operates in the voltage range from 1.5V to 9V.
Make sure the inserted, correspondingly rated batteries only
make contact at the marked contact surfaces.
– Insert the batteries the right way round to ensure correct polarity;
polarity reversal can adversely affect operation of the device.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications. Modifications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
To Next Page
Loading...
