30
EN
16 16b
– +
1 sec
17
3x
1 sec
Wood moisture/
temperature compensation
The relative material moisture of wood is
dependent on temperature. The device
automatically compensates for different
wood temperatures by measuring the
ambient temperature and using it for the
internal calculation.
To increase measuring accuracy, however,
the measuring device also offers an option
for setting the temperature manually (see
Step 16b). This value is not stored and
must be set again each time the device is
switched on.
LCD backlight
LED display illumination can be varied with 3 different settings:
AUTO: Display illumination switches off during periods of inactivity and
switches on again automatically for measurement procedures.
ON: Display illumination remains on permanently.
OFF: Display illumination remains off permanently.
The setting is stored and remains in effect until it is changed manually.
To Next Page
Loading...
Need help?
General
