Need help?Do you have a question about the LaserLiner BeamControl-Master BCM and is the answer not in the manual?
General| Brand | LaserLiner |
|---|---|
| Model | BeamControl-Master BCM |
| Category | Measuring Instruments |
| Language | English |
Identifies the integral handles and the 5/8 inch socket on the laser device.
Details the control panel layout, buttons, LEDs, and levelling vials.
Locates the rotary head, battery compartment lever, and threaded connection.
Identifies the three levelling screws (A, B, C) for device alignment.
Instructions for placing the BCM on a firm base or stand with a 5/8" thread.
Guides on adjusting horizontal vials (X and Y) using levelling screws.
Procedure for setting the device vertically using the levelling screw (Z).
How to turn on the BeamControl-Master BCM and activate rotation mode.
Using the device to emit a laser beam to a specific point.
Adjusting a light-intensive segment for breadth and position.
Operating the device for a 360° rotating laser beam up to 200 rpm.
Optimizing reception quality with high speed for the hand receiver.
Instructions for changing batteries when the red LED flashes.
Connecting an external power supply unit to the rotation laser.
Steps for preparing the device for calibration, including stand alignment.
Procedure for aligning the stand or level for X/Y axis calibration.
Checking the calibration of the Y-axis by marking points and turning the unit.
Checking and calibrating the X-axis by aligning the laser beam over the X vial.
Calibrating the vertical vial (Z-axis) by setting up between targets.
Details on output power, wavelength, and laser class.
Information on measurement accuracy, sensor type, and beam splitter.
Lists available operating modes and adjustable settings.
Specifications for battery service life and external power connection.
Overview of the SensoCommander, combining receiver and remote control functions.
Information on glasses that increase laser beam visibility.
Using the levelling staff to measure height differences.
Guidelines for setting up the tripod firmly and adjusting height.
Procedure to activate the laser receiver mode on the SensoCommander.
Adjusting sound volume levels for the SensoCommander.
Finding the exact height of the laser level using LEDs and sound signals.
Instructions for replacing batteries in the SensoCommander.
Contact and shipping addresses for service in Germany, UK, Netherlands, Denmark, and France.
Contact information for Umarex GmbH & Co KG - Laserliner.
To Next Page