6.3 Flexi Levelling Staff 2.4 m
With the flexi levelling staff, you can easily measure height differences.
1. Adjust zero at point A on the
flexi levelling staff to the height
of the laser.
2. You can now read off the
height difference between Point
A and B directly on the flexi
levelling staff.
ENGLISH 23
BeamControl-Master BCM
Special features of SensoCommander
By means of the universal holding device the
SensoCommander can be fixed onto a levelling staff
(e.g. flexible levelling staff).
Through the integrated magnet the
SensoCommander can also be used as
an electronic target plate, e.g. in acou-
stic ceiling construction and when set-
ting up and adapting metal and stora-
ge shelves.
6.2 Laser enhancement glasses
Increases visibility of the laser beam when working over long distances an
in unfavourable light conditions.
6.4 Tripod
When setting up the tripod, make
sure that the feet are set firmly
and at equal distance on the
ground (on soft ground, push
the feet in slightly). The height
can be adjusted by releasing
the catches and extending the
legs.
Horizontal
Vertical
5/8”
Special features
of Senso-
Commander
Laser enhance-
ment glasses
Flexi Levelling
Staff
Tripod
A
B
To Next Page
Loading...
Need help?
General
