DampMaster Compact Plus
33
Technical data
Measurement principle
Resistive material moisture measurement
by way of integrated electrodes
Modes
3 wood groups, 8 building materials
Index mode for 23 additional building materials
Accuracy
Wood: ± 0.3% from the end value ± 5 digits
Baustoffe: ± 0,5% v.E. ± 1 Digit
Nominal temperature 23°C
Operating conditions
0 ... 40°C, 85%rH, no condensation,
max. altitude 2000 m
Storage conditions -10 ... 60°C, 85%rH, no condensation
Radio module
operating data
Bluetooth LE 4.x interface
Frequency band: ISM band 2400–2483.5 MHz,
40 channels
Transmission power: max. 10mW
Bandwidth: 2 MHz
Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS
Power supply Batteries, 4x 1.5 V type AAA
Dimensions (W x H x D) 58 mm x 155 mm x 38 mm
Weight 186 g
EN
Functional and operational safety is only warranted when the instru-
ment is operated within the specified climatic conditions and is only
used for those purposes for which it is designed. The assessment of
measurement results and actions taken as a consequence lie in the
user‘s scope of responsibility, depending on the given type of work.
!
Technical revisions reserved. 03.17
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=damacopl
To Next Page
Loading...
Need help?
General
