LaserRange-Master T2
09
EN
2 sec
1x
1x
1x
2 sec
Switch on, measure and switch off:
device on measure device off
After switching on, the device starts with continuous
measurement.
!
a b
c
d
DISPLAY:
a
b
c
d
Measurement point (reference)
rear / front / thread
Continuous measurement /
Length measurement
Intermediate values
Measurement values /
Measurement results
Unit m / ft / inch / _‘ _“
1.
2.
1.
2.
1. + 2.
KEYPAD:
Measure
ON / OFF
Measurement point (reference)
rear / front / thread
Unit m / ft / inch / _‘ _“
Inserting batteries
Open the battery compartment and
insert batteries (2 x typ AAA)
according to the symbols.
Be sure to pay attention
to polarity.
1x 2x 3x
2 sec 1 sec 1 sec
Change measurement point (reference):
rear (device on) front thread
To Next Page
Loading...
