EasyManuals Logo

LaserLiner MasterCross-Laser 2 User Manual

LaserLiner MasterCross-Laser 2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
MasterCross-Laser 2 / MasterCross-Laser 2G
07
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
!
Function / Application
Cross-line laser vertical and horizontal alignment
The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.
With the magnetic clamp and wall bracket the device can be used as a standalone unit,
in a combination as well as in horizontal and vertical position.
– Ideal for mounting horizontally and vertically on drywall construction proles.
Automatic levelling range 3°, accuracy 2 mm / 10 m
General safety instructions
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 510 nm
EN 60825-1:2014
Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reections.
– Do not use the laser at eye level (1.40 ...1.90 m)
Reective, specular or shiny surfaces must be covered whilst laser devices are in operation.
In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
The device must only be used in accordance with its intended purpose and within the scope
of the specications.
GB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLiner MasterCross-Laser 2 and is the answer not in the manual?

LaserLiner MasterCross-Laser 2 Specifications

General IconGeneral
BrandLaserLiner
ModelMasterCross-Laser 2
CategoryLaser Level
LanguageEnglish

Related product manuals