17
MultiFinder Plus
8
B
Manual
calibration
C
Isolate an object to be
measured by passing
over it several times.
Manual
calibration
4
A
For localising live wires directly beneath the plaster or behind
wooden panels and other non- metallic panelling. It is not
possible to detect live wires in dry walls with metal studs.
– Select AC-SCAN (button 4).
– As soon as the display switches from CAL to CAL OK, you
can move the device.
– MOVE: Move the tool slowly across the surface.
AC-SCAN
GB
1_Manual_MultiFinder-Plus_Rev1112_DE-PL.indd 17 16.11.12 13:36
To Next Page
Loading...
