LaserLiner MultiFinder Plus - Page 15

6 Measuring in METAL-SCAN mode
The tool is able to detect hidden metal in all non-metallic
materials, e.g. brick, concrete, screed, wood, plaster fibreboard,
gas concrete, ceramic and mineral building materials.
– Select METAL-SCAN (button 4).
– As soon as the display switches from CAL
to CAL OK, you can move the device.
– MOVE: Move the tool slowly across the
surface.
15
MultiFinder Plus
B
A
EN
Briefly press the Mode button (4).
METAL-SCAN: Detecting metal in all
non-metallic materials.
AC-SCAN: Locating live lines directly
under non-metallic cladding.
STUD-SCAN: Detecting wooden wall beams and joists as well
as metal in drywall structures under non-metallic cladding.
5
Select measurement mode