LaserLiner MultiScanner Plus - Page 25

25
MultiScanner Plus
Subject to technical changes without notice. 22W45
Technical data
Detection range AC
110 … 230V, 50 … 60 Hz
Accuracy
typically 3% of measured depth
Indicators
LCD bar display
Connections
USB type C
Operating time
approx. 3 hours
Operating conditions
-10°C … 50°C, max. humidity
75% rH, no condensation
Storage conditions
-20°C ... 70°C,
max. humidity 80%rH
Power supply
Li-ion battery pack 3.7V / 0.3Ah
Dimensions (W x H x D)
87 mm x 205 mm x 38 mm
Weight
178 g (incl. battery pack)
Measuring depth
Wood/metal beam location
(STUD-SCAN)
Up to 2 cm depth
Targeted metal location:
Ferro-Scan/Non-Ferro-Scan
(METAL-SCAN)
Up to 12 cm /
up to 10 cm depth
Targeted location of live
supply lines (AC-SCAN)
Up to 4 cm depth
Location of dead
supply lines
Up to 4 cm depth
EU and UK directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU and the UK.
This product, including accessories and packaging, is an
electrical appliance that must be recycled in an environmentally
appropriate manner in accordance with European and UK
directives on waste electrical and electronic equipment,
batteries and packaging, in order to recover valuable raw
materials.
Further safety and supplementary notices at:
http://laserliner.com
EN