04
Function / application
Completely read through the operating instructions, the
“Warranty and Additional Information” booklet as well as
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
!
The ThermoSensor Clamp is a K-type temperature sensor for measu-
ring the contact temperature on metal tubes from 6 to 35 mm. This
product has a heat-resistant handle and is suitable for use with the
following devices: ThermoMaster, ThermoSpot XP, CondenseSpot
XP, MultiMeter XP and ClampMeter XP.
– The device must only be used in accordance with its intended
purpose and within the scope of the specications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– The structure of the device must not be modied in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or signicant vibration.
– Do not power the temperature sensor (K-type) with an external
voltage.
– Risk of damage! The measuring surfaces may scratch sensitive
material.
– Risk of pinching! Do not reach into the clamping bracket!
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Store the device in a clean
and dry place.
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
General safety instructions
Information on maintenance and care
Safety instructions
Dealing with electromagnetic radiation
EN
To Next Page
Loading...
Need help?
General
