ICS Contactors Wiring Manual
01518-53-000
Page 7 of 8
Issue 2 13 January 2020
4 Specifications
Safety Performance Up to PL’e’ to EN ISO 13849-1:2008
when wired as detailed in this instruction.
Supply Voltage 24VDC nominal.
Power Consumption 12W typical (32A contactors).
Output Contact Rating Refer to markings on contactor bodies.
Ingress Protection IP40
Operating Conditions 0° to 55°C, 0% - 95% relative humidity non-condensing.
Size 180mm wide X 182mm high X 163mm deep
Dimensions are approximate. Values given as ‘typical’ are average values measured across a number
of samples and are not guaranteed. Lasermet reserve the right to alter any specification without
prior notice.
5 Warranty
Lasermet provide a 12-month warranty for defects in materials and manufacture, from the date of
installation or delivery. Installations completed by Lasermet are covered against defects in
workmanship for 12 months.
Damage or defects caused by other factors are not covered. For example, industrial contamination,
incorrect cleaning, storm damage. Consequential loss is not covered under warranty. Compensation
for indirect or direct loss or damage is expressly excluded. Rectification of the defects or a
replacement does not initiate a new warranty period.
For all deliveries, payments and other legal transactions, English law takes precedence for any
litigation.
To Next Page
Loading...