Need help?Do you have a question about the LaserPro Spirit Series and is the answer not in the manual?
Defines four key points for checking the laser beam's path through the machine.
Guides through the control panel to initiate a laser test fire sequence.
Positions the machine at P1, closes the lid, and fires the laser to create a burn mark.
Tests Mirror 2 at P2, analyzes burn marks, and identifies adjustment needs.
Details the procedure for safely opening the machine's upper lid.
Explains core alignment principles, including the role of the red beam.
Provides instructions for fine-tuning Mirror 2 using its prism mount.
Re-tests Mirror 2 to confirm correct alignment with the P1 burn mark.
Tests and aligns Mirror 3 by checking beam marks at points P3 and P4.
Describes preparing the nozzle and carriage for Mirror 1 beam testing.
Adjusts Mirror 1 to direct the beam to the center of the air nozzle opening.
Identifies and explains the function of adjustment screws on the Mirror 1 prism mount.
Provides guidance on adjusting Mirror 1 screws for precise beam centering.
Adjusts Mirror 0 to align the red alignment beam with the CO2 laser's burn mark.
Creates a test rectangle in software for measuring and setting the machine origin.
Measures distances to determine the required offset for accurate origin setting.
Guides through the process of inputting and confirming the new origin coordinates.
To Next Page
General
