To Next PageTo Next Page
Need help?Do you have a question about the Laserworld EL-230RGB and is the answer not in the manual?
Describes how to set the device to auto mode for standalone operation.
Explains operating the device in music mode and adjusting music sensitivity.
Details setting the DMX address and using a DMX controller for laser operation.
Provides instructions for safely turning off and disconnecting the device.
General| Product type | Disco laser projector |
|---|---|
| On/off switch | Yes |
| Product color | Black |
| Laser class | 3B |
| Light color | Blue, Green, Red |
| Lamps quantity | - lamp(s) |
| Number of bulbs | - bulb(s) |
| Color of laser beam | Red/Green/Blue |
| Laser wave power (red) | 100 mW |
| Laser wavelength (red) | 650 nm |
| Laser wave power (blue) | 50 mW |
| Laser wavelength (blue) | 445 nm |
| Laser wave power (green) | 20 mW |
| Laser wavelength (green) | 532 nm |
| Input voltage | 85 - 250 V |
| Power source type | AC |
| Power consumption (typical) | 15 W |
| Lighting modes | DMX, Sound activated, Stand-alone |
| Beam angle (max) | 30 ° |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 188 mm |
| Height | 106 mm |
| Weight | 2600 g |
| Ball diameter | - \ |
