EasyManua.ls Logo

Lasko 6250 User Manual

Lasko 6250
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rev. A 6/11
1
6250/6252ES
Rev. A 6/11
12
6250/6252ES
ELECTRONIC FAN-FORCED HEATER
with WARM AIR MOTION TECHNOLOGY
MODEL 6250/6252
MODELO 6250/6252
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL
SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
SAVE THESE INSTRUCTIONS
This Heater is intended for use as supplemental heat.
This Heater is for residential use only.
It is not intended to be used in commercial, industrial or agricultural settings.
NOTAS
Question and Answer IconNeed help?

Do you have a question about the Lasko 6250 and is the answer not in the manual?

Lasko 6250 Specifications

General IconGeneral
BrandLasko
Model6250
CategoryHeater
LanguageEnglish

Summary

Important Instructions - Operating Manual

Read and Save These Instructions

Essential instructions to read carefully before assembly, installation, operation, or maintenance.

General Safety Information

Direct Plug-In Requirement

Always plug heaters directly into a wall outlet/receptacle, never use extension cords or multi-outlet devices.

Faulty Wall Outlet Warning

Check for tight plug fit; faulty connections can overheat and pose a fire hazard.

Caution with Vulnerable Users

Exercise extreme caution when used by or near children, invalids, or when left unattended.

Damaged Unit Prohibition

Do not use if cord, plug, or unit is damaged; contact customer service for assistance.

Safe Power Disconnection

Always unplug the power cord; do not rely solely on the ON/OFF switch for servicing or moving.

Unplug When Not In Use

Always unplug the heater when not in use or before servicing or moving the unit.

Ventilation Opening Safety

Do not insert objects into openings to prevent shock, fire, or damage to the heater.

Burn Prevention and Combustibles

Avoid touching hot surfaces; keep combustibles 3ft from front, 1ft from sides/rear.

Solid State Speed Control Warning

Reduce risk of fire/shock; do not use this heater with any solid state speed control devices.

Safety Functions

Maintenance

Water Prohibitions

Never place the heater in or near water; do not immerse the heater in water.

Operation

Related product manuals