Do you have a question about the Lasko CT22650 and is the answer not in the manual?
Read instructions carefully before use. Observe all safety information to prevent injury or damage.
Follow all instructions to reduce risk of fire, shock, and injury. Use 120V outlets, avoid extension cords.
Operate functions like manual controls. Install two AAA batteries. Do not mix battery types.
Built-in thermal overload protector prevents overheating. Unit shuts off if overheated and requires manual reset.
Heater shuts off unexpectedly? Check power, temperature setting, or clean the unit. Contact support if issues persist.
Plug into outlet, press power button for ON/HIGH heat. Press for LOW heat. Turn OFF and unplug.
Press button to oscillate back and forth. Press again to stop oscillation.
Set timer for 1-7 hours for automatic shut-off. Press timer button to adjust time increments.
Set desired room temperature on High heat. Heater cycles to maintain temp. MAX setting runs continuously.
Unplug before cleaning. Use vacuum with brush attachment. Clean body with soft cloth. Do not use solvents.
Contact customer service for repairs. Store in original carton in a cool, dry place.
Dispose of packaging materials responsibly. Contact local waste service for product disposal.
Three-year warranty against defects in workmanship/materials. Covers repair/replacement. Excludes damage, misuse, commercial use.