RESETTING FILTER REPLACEMENT REMINDER
After replacing worn Filter, reset the reminder by using the following method:
1. Press Filter Reset once. You will notice the red light will flash.
2. Hold the reset button down for 5 seconds to reset reminder. The unit will beep when the
reset is complete.
3. Repeat Steps 1-3 if other Filters were replaced.
Troubleshooting Guide
How do I install the Filters
Please review page 4 for proper Filter sequence. It is important to
install the Filters in the correct order, and routinely replace your
Filters as recommended.
The Air Purifier is running but
I can’t change the settings
The buttons detect human touch. If you are pressing the buttons
with a glove or foreign object, the controls may not respond.
The Air Purifier is plugged
in but nothing works
a. The Rear Filter Door may have been removed. If so, replace the
Filters and the Filter door.
b. The fused plug is a safety device and may have been activated.
If so, please contact customer service. Do not attempt to replace
or bypass this feature.
HF25610ES
New 4/14
10
New 4/14
7 HF25610ES
ÍNDICE
Advertencias .................................................................................................. 11
Especificaciones del producto ................................................................ 12
Descripción del filtro ................................................................................... 12
Instalación del filtro ..................................................................................... 12
Pautas de operación ................................................................................... 13
Operacion ....................................................................................................... 14
Solución de problemas .............................................................................. 15
Garantía y Servicio al Cliente ................................................................... 16
To Next Page
Loading...
Need help?
General
