EasyManua.ls Logo

Last Calor Alba - User Manual

Last Calor Alba
109 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ALBA
1
Manuale d’installazione, uso e manutenzione
Installation, use and maintenance manual
Manuel d’installation, d'utilisation et d'entretien
Installations-, Bedienungs- und Wartungsanleitung
Manual de instalación, uso y mantenimiento
Stufa a pellet mod - Pellet stove model - Poêle à granulés mod.
Pelletofen Modell - Estufa de pellets mod.
ALBA
Leggere attentamente le istruzioni prima dell’installazione, utilizzo e manutenzione.
Il manuale è parte integrante dell’apparecchio.
Read the instructions carefully before installation, use and maintenance.
The manual is an integral part of the unit.
Lire attentivement les instructions avant d'installer, d'utiliser et d'entretenir le poêle.
Le manuel fait partie intégrante de l'appareil.
Vor Installation, Gebrauch und Wartung muss diese Anleitung aufmerksam durchgelesen werden.
Das Handbuch ist wesentlicher Bestandteil des Geräts.
Lea atentamente las instrucciones antes de realizar la instalación, el uso y el mantenimiento.
El manual es parte integrante del equipo.
48421W700-M5_06/14
Hardware - M

Table of Contents

Questions and Answers

  • A
    Amanda HensonAug 10, 2025
    What to do if Last Calor Pellet stove shows AL 5 NO IGNITION?
    • J
      James HawkinsAug 10, 2025
      If your Last Calor pellet stove fails to ignite, first, check if there are pellets in the hopper. Then, review the lighting procedures. If these steps don't resolve the issue, further inspection by a service center may be needed, as the electrical element could be faulty, dirty, or incorrectly positioned, or the pellet load setting might be incorrect.
  • C
    christophercunninghamAug 16, 2025
    What to do if Last Calor Pellet stove shows AL 6 NO PELLETS?
    • G
      Gabrielle Bentley DDSAug 16, 2025
      If your Last Calor pellet stove displays the 'AL 6 NO PELLETS' error, start by checking if the pellet hopper is empty. If the hopper has pellets, the pellet feed gearmotor may need adjustment to ensure proper pellet flow. If the gearmotor still doesn't feed pellets, further assistance from a service center is required.
  • R
    Renee SellersAug 23, 2025
    Why Last Calor Pellet stove emits HOT FUMES?
    • M
      Michael ShepherdAug 23, 2025
      If your Last Calor pellet stove is emitting excessively hot fumes, adjust the pellet flow to reduce the amount of pellets being burned. If the issue persists, it could be due to a faulty tangential fan or lack of power to the fan, requiring further inspection by a service center.
  • B
    Brittany CooperAug 28, 2025
    What to do if Last Calor Alba Pellet stove displays AL 7 THERMAL SAF?
    • B
      Brittany WattsAug 28, 2025
      If your Last Calor pellet stove displays 'AL 7 THERMAL SAF,' it means the safety thermostat detected overheating in the hopper's bottom section, which blocked the gearmotor. You should check for the cause of the overheating. After resolving the cause, reset the safety thermostat by pressing the reset button.
  • M
    Melissa RobertsonSep 3, 2025
    What to do if Last Calor Alba Pellet stove displays AL 1 POWER FAILURE?
    • M
      Michelle BrownSep 4, 2025
      If your Last Calor pellet stove displays 'AL 1 POWER FAILURE' during the lighting stage, turn the stove off by pressing button P4 and repeat the lighting procedure. If the problem continues, a service center must carry out other reinstatement operations.

Last Calor Alba Specifications

General IconGeneral
BrandLast Calor
ModelAlba
CategoryPellet stove
LanguageEnglish

Related product manuals