Need help?Do you have a question about the Lastec WZ800 Series and is the answer not in the manual?
Emphasizes the importance of reading the manual before operation.
Instructions for recording mower model and serial numbers for registration.
Guide on completing and returning the warranty registration form.
Guidance on contacting distributors for ordering replacement parts.
Overview of routine inspection, cleaning, and maintenance for dependable service.
Details the Lastec 2-year/2000-hour limited warranty and 90-day wear component warranty.
Lists component parts warranted by their respective manufacturers.
Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard identification.
Introduces the safety information section and defines directional terms.
Stresses the importance of keeping all safety guards and covers installed.
Rules to follow before starting the mower, including personnel safety.
Specifies required personal protection equipment (PPE) for safe operation.
Guidelines for safe operation of the mower, covering fuel, movement, and environment.
Safety precautions and procedures to follow during maintenance and adjustments.
Rules for safely storing the mower to prevent hazards.
Safety precautions when working with the mower's battery system.
Step-by-step guide for safely connecting and using booster cables.
Identifies common safety decals and symbols found on the mower.
A chart detailing hazards, risk sources, and control measures for operator safety.
Instructions for setting and releasing the parking brake before operations.
Safety precautions and guidelines for handling and using fuel.
Procedures for opening the engine cover and operator seat pan for access.
Guidance on checking and maintaining engine oil level and quality.
Instructions for inspecting and cleaning the air cleaner elements.
Procedures for checking and maintaining the engine coolant level and system.
Guidelines for checking and maintaining hydraulic fluid level and system.
Steps to set the hydrostatic pumps for towing the mower.
Safety and procedure for adjusting the hydrostatic pumps.
Guidance on inspecting the hydrostatic pump drive belt.
Instructions for checking the mower deck drive belt condition.
Guidance on inspecting mower deck belts and tensioning systems.
Safety and procedures for inspecting, adjusting, or changing mower blades.
Ensuring the operator seat and seatbelt are secure and operable.
Procedures for checking and ensuring proper function of steering control levers.
Adjusting mower deck height to the desired cutting range.
Adjusting wheel yoke height for desired cutting height.
Fine-tuning the adjustable wheel yokes for precise height settings.
Adjusting rear deck wheels for aligning cutting height.
Adjusting deck rake to set rear blades higher than front blades.
Steps for calibrating the mower deck height for accurate cutting.
Checking tire air pressure and verifying wheel function.
Verifying decals, covers, and safety devices are properly installed and secure.
Checking engine operation, exhaust, and listening for unusual noises.
Information about the hour meter for tracking usage and maintenance.
Reminder to complete maintenance checklists at indicated intervals.
Checklist of pre-operation inspections to ensure safe and proper functioning.
Overview of the operator control panel, buttons, and switches.
Safety conditions and steps for starting the mower engine.
Procedures for safely stopping the mower engine.
Monitors and controls engine functions and parameters.
Explains engine ECU's management of pre-alarms and safety shutdowns.
Information on engine emissions monitoring and regeneration processes.
How to use steering control levers to govern motion and ground speed.
Guidance on selecting appropriate low-lift and high-lift mower blades.
Procedures for operating the mower decks.
Description and use of mulching blades for grass clipping management.
How to engage and disengage the mower blades (PTO).
Procedures for raising and lowering the mower wing decks.
Safety warnings and procedures for loading, unloading, and transporting the mower.
Emphasizes the importance of proper and timely maintenance for mower performance.
Daily maintenance tasks including inspections and cleaning.
Specific maintenance tasks required after the first 25 operating hours.
Specific maintenance tasks required after the first 50 operating hours.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Maintenance tasks to be performed every 200 operating hours.
Maintenance tasks to be performed every 400 operating hours.
Maintenance tasks to be performed every 500 operating hours.
Annual maintenance tasks to ensure continued operation.
Maintenance tasks to be performed bi-annually.
Importance of keeping urethane bushing bolts tight and maintenance considerations.
A comprehensive schedule detailing maintenance tasks by operating hours.
Identifies lubrication points and frequency for the mower.
Lists part numbers and descriptions for hydraulic hoses.
Wiring diagrams for understanding the mower's electrical system.
Detailed wiring harness diagrams and information.
General| Brand | Lastec |
|---|---|
| Model | WZ800 Series |
| Category | Lawn Mower |
| Language | English |
To Next Page