12. EC Declaration of Conformity
EC DECLARATION OF CONFORMITY
The manufacturer or his authorised representative
established in the community:
Latchways plc
Hopton Park, Devizes
Wiltshire SN10 2JP
England
Declares that the new PPE described hereafter
VERTICAL FALL ARREST SYSTEMS
is in conformity with the provisions of Council Directive 89/686/EEC and, where such is the case,
with the national standard transposing harmonised standard No EN353-1 and VG11
recommendations for use CNB/P/11.073 (for the PPE referred to in article 8(4)) is identical to
the PPE which is the subject of EC certificate of conformity No ZB049/95 issued by:-
DEKRA EXAM GmbH (Notified Body No: 0158 – formerly DMT)
Dinnendahlstrasse 9
44809 Bochum
Germany
and is subject to the procedure set out in Article 11 point B of Directive 89/686/EEC under the
supervision of the notified body:-
INSPEC International Limited (Notified Body No: 0194)
56 Leslie Hough Way,
Salford, Greater Manchester,
M6 6AJ,
England
June 2012
T. Bissett
Technical Manager
To Next Page
Loading...