LATICRETE STONETECH KlenzAll - User Manual

STONETECH
®
KlenzAll™ Cleaner
DS 215.0-0516
Data Sheets are subject to change without notice. For latest revision, visit www.laticrete.com DS-215.0-0516
1. PRODUCT NAME
STONETECH
®
KlenzAll™ Cleaner
2. MANUFACTURER
LATICRETE International, Inc.
1 LATICRETE Park North
Bethany, CT 06524-3423 USA
Telephone: +1.203.393.0010
Toll Free: +1.888.786.6343
Fax: +1.203.393.1684
Website: www.laticrete.com
3. PRODUCT DESCRIPTION
STONETECH KlenzAll Cleaner is a heavy duty cleaner made to
clean the toughest soils on natural stone and tile.
Uses (Interior and Exterior)
 Countertops
 Backsplashes
 Floors
 Walls
Advantages
 Powers through stubborn grease and soils
 Safe on stone, will not etch
 Prepares surface for resealing
 Water-based alkaline formula
 Ready-to-use or concentrate formulas
Recommended Surfaces
Natural stone, masonry, tile and grout surfaces such as:
 Marble
 Granite
 Limestone
 Travertine
 Slate
 Sandstone
 Flagstone
 Concrete
 Ceramic Tile
 Porcelain Tile
 Quartzite
Item Numbers and Packaging
Ready-to-use
D12549682– 24fl.oz. (709mL) Spray Bottle, 12 units per Case, 480
units per Pallet
Concentrate
D12446928 - Sample 2oz. (59mL), 12 units per Case
D14435661 – Quart 32 oz. (946 mL), 6 units per Case, 600 units per
Pallet
D12612328 - Gallon (3.8 L), 4 units per Case, 160 units per Pallet
D12612335 – 5 Gallon (18.9L), 1 unit per Case, 48 units per Pallet
Products Available for Sale in Canada Only:
D12781560- 24 fl. oz. (709 mL) Spray Bottle, 12 units per Case, 480
units per Pallet
D12752782 - Gallon (3.8 L), 4 units per Case, 160 units per Pallet
Shelf Life
Factory sealed containers of this product are guaranteed to be of first
quality for two (2) years if stored at temperatures >50°F (10°C) and
<90°F (32°C).
VOC Content
Heavy duty: 0.93% (Consumer Product)
Cautions
Consult SDS for more safety information.
 Inhalation: Remove victim to fresh air and keep at rest in a
position comfortable for breathing. Get medical attention if any
discomfort continues.
 Skin contact: Remove contaminated clothing immediately and
wash skin with soap and water. Get medical attention
immediately.
 Eye contact: Immediately flush eyes with plenty of water for at
least 15 minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. Get medical attention immediately.
 Ingestion: Rinse mouth. Do not induce vomiting. If vomiting
occurs, keep head low so that stomach content doesn't get into
the lungs. Get medical attention.
Storage and Handling Instructions
CORROSIVE. HARMFUL IF SWALLOWED. MAY CAUSE SEVERE
EYE AND SKIN BURNS, AND RESPIRATORY IRRITATION. Do not
ingest. Avoid contact with eyes and skin. Use protective eyewear and
gloves. Avoid prolonged exposure to vapors. Use in a well-ventilated
area. For repeated or professional spray use, a respirator is

Summary

Product Description and Uses

Product Uses and Advantages

Details uses for countertops, floors, walls, and key advantages like etching safety and preparation for resealing.

Recommended Surfaces

Lists natural stone, masonry, tile, and grout types such as marble, granite, limestone, travertine, slate, and concrete.

Product Details and Packaging

Item Numbers and Packaging Options

Lists available sizes, packaging units, and pallet quantities for ready-to-use and concentrate formulations.

Shelf Life and VOC Content

Specifies product shelf life under defined storage conditions and its VOC percentage for consumer products.

Safety and Handling Instructions

Cautions and First Aid Measures

Provides immediate actions for inhalation, skin, eye contact, and ingestion, recommending consulting the SDS.

Storage and Handling Precautions

Details handling requirements like protective gear, ventilation, and storage temperature limits to avoid hazards.

Technical Data and Installation Guide

Technical Data: Physical Properties

Outlines physical characteristics of the cleaner, including form, color, and odor.

Installation and Application Instructions

Covers surface preparation, mixing ratios for concentrate, application methods, and rinsing for both forms.

Product Support and Information

Maintenance and Technical Services

Advises on routine cleaning, maintenance recommendations, and provides technical assistance contact information.

Warranty and Filing System References

References the product warranty and lists related technical documents and filing system references.

Overview

1. Function Description
2. Important Technical Specifications
3. Item Numbers and Packaging
4. Usage Features
5. Advantages
6. Directions for Concentrate Use
7. Directions for Ready-to-Use
8. Cautions and Safety
9. Maintenance Features

The STONETECH® KlenzAll™ Cleaner is a heavy-duty cleaning solution designed to tackle tough soils on natural stone and tile surfaces. It is available in both ready-to-use and concentrate formulas, offering versatility for various cleaning needs.

Function Description:

The primary function of STONETECH KlenzAll Cleaner is to effectively remove stubborn grease and soils from a wide range of surfaces without causing damage. Its water-based alkaline formula is specifically formulated to be safe on natural stone, ensuring it will not etch delicate materials. Beyond cleaning, it also prepares surfaces for resealing, making it an integral part of a comprehensive stone and tile maintenance regimen.

Important Technical Specifications:

• Form: Liquid
• Color: Light yellow
• Odor: Mild
• VOC Content: 0.93% (for heavy-duty consumer product)
• Shelf Life: Factory-sealed containers are guaranteed to be of first quality for two (2) years when stored at temperatures >50°F (10°C) and <90°F (32°C).
• pH (Concentrate Dilutions):
  • Heavy Duty (1 part cleaner: 2 parts warm water): 11.3
  • Medium Duty (1 part cleaner: 4 parts warm water): 11.0
  • Light Duty (1 part cleaner: 8 parts warm water): 10.7
  • Acid Neutralizer (1 part cleaner: 32 parts warm water): 10.5

Item Numbers and Packaging:

• Ready-to-use:
  • D12549682: 24 fl. oz. (709 mL) Spray Bottle, 12 units per case, 480 units per pallet.
• Concentrate:
  • D12446928: Sample 2 oz. (59 mL), 12 units per case.
  • D14435661: Quart 32 oz. (946 mL), 6 units per case, 600 units per pallet.
  • D12612328: Gallon (3.8 L), 4 units per case, 160 units per pallet.
  • D12612335: 5 Gallon (18.9 L), 1 unit per case, 48 units per pallet.
• Products Available for Sale in Canada Only:
  • D12781560: 24 fl. oz. (709 mL) Spray Bottle, 12 units per case, 480 units per pallet.
  • D12752782: Gallon (3.8 L), 4 units per case, 160 units per pallet.

Usage Features:

STONETECH KlenzAll Cleaner is suitable for both interior and exterior applications on a variety of natural stone, masonry, tile, and grout surfaces, including:

• Marble
• Granite
• Limestone
• Travertine
• Slate
• Concrete
• Ceramic Tile
• Porcelain Tile
• Quartzite
• Countertops
• Backsplashes
• Floors
• Walls

Advantages:

• Powerful Cleaning: Effectively removes stubborn grease and soils.
• Stone Safe: Will not etch natural stone surfaces.
• Surface Preparation: Prepares surfaces for resealing.
• Water-based Alkaline Formula: Environmentally conscious and effective.
• Versatile Formulas: Available in both ready-to-use and concentrate options to suit different cleaning needs.

Directions for Concentrate Use:

1. Dilution: Dilute the concentrated cleaner with warm water according to the desired cleaning strength (Heavy Duty, Medium Duty, Light Duty, or Acid Neutralizer) using the provided mixing chart.
2. Application: Apply the mixed solution with a mop, clean cloth, or sprayer, taking care to avoid unintended surfaces.
3. Agitation: Lightly rub the surface with a scrub brush or floor machine as needed.
4. Removal: Remove the cleaner using a clean cloth, wet/dry vacuum, or damp mop.
5. Rinsing: Rinse the area well with clean water.
6. Resealing: Reseal the cleaned area with a STONETECH sealer.

Directions for Ready-to-Use:

1. Application: Spray directly onto the soiled area, avoiding unintended surfaces.
2. Agitation: Scrub with a clean cloth or stiff nylon brush as needed.
3. Removal: Remove the cleaner using a clean dry towel or mop.
4. Rinsing: Rinse the area well with clean water.
5. Resealing: Reseal the cleaned area with a STONETECH sealer.

Cautions and Safety:

• Corrosive: This product is corrosive and harmful if swallowed.
• Irritation: May cause severe eye and skin burns, and respiratory irritation.
• Ingestion: Do not ingest. If ingested, rinse mouth and do not induce vomiting. Seek medical attention immediately.
• Contact: Avoid contact with eyes and skin.
• Protection: Use protective eyewear and gloves during handling.
• Ventilation: Use in a well-ventilated area. For repeated or professional spray use, a respirator is recommended.
• Storage: Keep out of the reach of children. Do not freeze or store above 100°F (38°C).
• Mixing: Do not mix with other chemicals.
• Disposal: Do not release into natural waterways.
• First Aid:
  • Inhalation: Remove victim to fresh air and keep at rest. Seek medical attention if discomfort continues.
  • Skin Contact: Remove contaminated clothing, wash skin with soap and water. Seek medical attention immediately.
  • Eye Contact: Flush eyes with plenty of water for at least 15 minutes. Remove contact lenses if present and easy to do. Continue rinsing. Seek medical attention immediately.

Maintenance Features:

• Routine Cleaning: For daily maintenance, a neutral pH cleaner like STONETECH Stone & Tile Cleaner is recommended, as highly alkaline, acidic, ammoniated, or abrasive cleaners can degrade sealers and adversely affect stain resistance.
• Testing: Always test any cleaning material on a discrete area or scrap piece of tile to ensure desired results before full application.
• Resealing: After cleaning with STONETECH KlenzAll Cleaner, resealing the surface with a STONETECH sealer is recommended to maintain protection.

LATICRETE STONETECH KlenzAll Specifications

General

Brand	LATICRETE
Model	STONETECH KlenzAll
Category	Ultrasonic Jewelry Cleaner
Language	English