Need help?Do you have a question about the LaTrax Desert Prerunner 76064-5 and is the answer not in the manual?
Carefully read and follow all instructions to prevent serious damage to your model and injury.
Identifies safety warnings, helpful hints, and cross-references using icons for easier operation.
Provides contact details for customer support regarding model operation and technical questions.
Key rules: no public roads, no crowds, radio interference margin, motor heat, night operation, common sense.
Details regulatory compliance information for FCC and Industry Canada standards for the device.
Highlights the critical fire hazard associated with LiPo batteries and the need for proper handling and education.
Specific warnings for LiPo batteries: discharge voltage, charger compatibility, and handling procedures.
General precautions for charging and handling all battery types, emphasizing safety and correct procedures.
Lists the items included with your model to get it running immediately.
Lists additional tools and accessories recommended for an R/C toolbox and model maintenance.
Step-by-step guide to install 4 AA batteries into the transmitter for operation.
Guidance on using AA batteries, including alkaline and rechargeable NiMH types for the transmitter.
Instructions on how to charge the included NiMH battery pack using the provided charger.
Defines key terms related to the radio and power systems used in the manual for better understanding.
Instructions on how to use the radio system, including initial setup, checking operation, and basic adjustments.
Procedure for range-testing the radio system before each running session to ensure proper operation.
Advises on maintaining radio range at higher speeds and driving techniques for better control.
Instructions on how to bind the transmitter and receiver electronically if needed.
Explains the failsafe function of the radio system and what to do if it activates.
Lists transmitter LED color patterns, their names, and corresponding notes for troubleshooting.
Lists receiver LED color patterns, their names, and corresponding notes for troubleshooting.
Explains how to select different ESC profiles (Sport, Race, Training) for varying performance.
Instructions on operating the ESC, including turning it on/off, forward, brake, and reverse control.
Explains Low-Voltage Detection settings for the ESC and how to verify/disable it for NiMH batteries.
Describes ESC LED codes and protection modes like thermal shutdown and low-voltage protection.
Discusses factors affecting run time, battery mAh rating, and driving habits.
Provides tips to increase battery run time, including using higher mAh batteries and proper charging.
Explains how to adjust shock mounting positions for different driving conditions and tuning suspension.
Steps to take before running the model in wet conditions, emphasizing understanding maintenance requirements.
Advises on motor care in wet conditions to prevent failure and extend its lifespan.
Detailed procedures for cleaning, drying, and lubricating the model after running in wet conditions.
Checklist for inspecting the vehicle for damage, wear, and proper function of components.
Lists periodic maintenance tasks for the motor, chassis, shocks, suspension, and driveline.
Instructions on how to properly store the model and remove batteries when not in use for extended periods.
Technical specifications for the Electronic Speed Control (ESC) and the motor.
To Next Page
General