8 Maintenance
The interface module is maintenance-free.
Any dust and dirt deposits should be cleaned from the connections on the
interface module on a regular basis, especially if the interfaces are not being
used.
WARNING!
Live parts in contact with cleaning agent
Electric shock, material damage
Disconnect the device from the mains supply before
starting any cleaning work.
Water and other fluids should not be allowed to enter the
device.
NOTICE!
Repairs performed by unauthorized persons
Material damage
Only specialized personnel are permitted to carry out
repairs.
1. Use a damp cloth or brush to remove any dust and dirt deposits.
2. When using compressed air: Always set a low working pressure to
prevent mechanical damage to the connections.
If you have any questions about technical modifications, please
contact LAUDA Service, see Ä Chapter 1.6 “Contact LAUDA”
on page 6.
V1 Interface module LRZ 914 / 915 23 / 29
To Next Page
Loading...