Need help?Do you have a question about the Lauda RP 250 E and is the answer not in the manual?
General| Temperature range | -50 ... 200 °C |
|---|---|
| Temperature Stability | ±0.01 °C |
| Cooling output at 20°C | 250 W |
| Cooling Power | 250 W |
| Power Supply | 230 V; 50 Hz |
| Heating Power | 2500 W |
Describes the types of thermostats covered in the manual.
Defines the proper and intended applications for bath and circulation thermostats.
Covers safety warnings and instructions related to device installation.
Provides technical data and configuration steps for the Ethernet interface.
Lists and explains error messages that can be received from the device.
Lists permitted heat transfer liquids and their properties, including order numbers.
Contains warnings and safety instructions related to filling the device with liquid.
Covers safety warnings and notes for establishing a mains connection.
Explains how to set temperature limits Tih and Til for the device.
Instructs on how to set the temperature target value Tset for the device.
Details the available settings for configuring Safety Mode parameters.
Introduces external control and how to set up temperature regulation.
Explains the programmer's function for creating temperature-time programs.
Explains how to start, pause, continue, and end a program.
Provides a basic explanation of terms related to control systems.
Describes the external control system and its parameters.
Explains the Offset calibration method for temperature probes.
Describes the 2-point calibration method for temperature probes.
Guides on how to access and interpret the device's error memory.
Provides critical safety instructions for performing maintenance on the device.
Outlines the recommended maintenance intervals and tasks.
Details how to check the overtemperature protection functionality.
Describes how to check the low-level protection functionality.
Explains how alarms, warnings, and errors are displayed and handled.
Lists safety system warnings, including CAN overflow and software version issues.
Details the procedure and safety precautions for changing or draining heat transfer liquid.
To Next Page
