35
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
© Systeme Lauer GmbH MODBUS 1-direct driver
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○
○○
C
Description of the loadable MODBUSPS driver for the PCS operating con-
sole. For the communication with an AEG MODICON 984 PLC.
Functionality: Selective MODBUS 1 direct driver for AEG MODICON PLC.
Required devices and accessories:
The following products are required for the operation of a programmable controller
with an already parameterized PCS (Systeme Lauer company):
1. The PCS operating console itself (already parameterized).
2. The PCS 780 connecting cable for the PCS - programmable controller connection
via the MODBUS interface.
3. This (PCS 91.AEG) manual with AEG master floppy disk (MODBUSPS\
PCSKOMM project),
4. Floppy disk and PCSPRO and/or PCS9092 manual with MODBUSPS driver.
Furthermore are necessary (AEG company):
5. A MODICON 984 programmable controller with power supply, rack and I/O
boards.
6. AEG LMODSOFT programming software with programming cable.
.... as well as power supplies for all components.
To Next Page
Loading...