Lauf Seigla - Page 10

Loosen the seat clamp.
Twist the seat to roughen the
contact surface and help prevent
the seatpost from slipping.
Set the height and torque to 5Nm.
Adjust the saddle close to preferred
height, and tighten gently (~2Nm).
Apply a generous amount
of carbon paste inside the
seat tube and on the seat post.
laufcycling.com
10Seigla Assembly Guide Seatpost
5
N
m
Carbon Paste
01
03
04
02
5
N
m
5
N
m
05
5
N
m
PLEASE USE
Allen key
4 mm
Carbon
Paste
Torque
wrench
Torque
to 5Nm
5
30
4
DIRECTION