Lightly apply grease to the thru
axle before installing it.
Tighten the axle with a torque wrench
to 12Nm. It is crucial to tighten the thru
axle properly to ensure good lateral
rigidity of the fork.
14Seigla Assembly Guide Front wheel
Make sure NOT
to squeeze the
front brake lever
until front wheel
has been installed
WARNING
Remove the thru axle before
installing the wheel.
Grease
Insert the thru axle through
the hub mounts on the fork.
Place the wheel into
the fork hub guides.
PLEASE USE
Allen key
6 mm
Torque
wrench
Torque
to 5Nm
5
30
4
DIRECTION
To Next Page
Loading...