Lauf Seigla - Page 16

PLEASE USE IF NEEDED
Allen key
6 mm
Torque
wrench
Open end wrench
/ Pedal wrench
Hex key
8 mm
Washers
Bike
grease
03
02
05
04
Take out the thru axle before
installing the wheel.
Depends on pedals of choice. Often
6mm or 8mm hex/allen key or a 15mm
open end wrench / pedal wrench.
laufcycling.com
16Seigla Assembly Guide Pedals
Lightly grease the threads
of the pedals before installing.
Install the included washers
onto the pedal spindles.
Please follow to the torque recommendations
provided by the pedal manufacturer.
01
02
Grease
Turn the pedal wrench / allen key
clockwise to tighten the drive side
pedal (R) and counterclockwise to
tighten the non-drive side pedal (L).
Turn the inner attachment
with you hands until you
need wrench / allen key.
1
2