6
4. PRE-OPERATION INSPECTION
4-I. Fuel Inspection
·Is there gasoline in the tank?
·Is old gasoline being used?
·Is the fuel tank cap closed correctly?
WARNING:
Be sufficiently careful of heat and flame when handling the fuel. Not doing so could
cause fire or explosion
4-2. Air-cleaner Inspection
·Is the air-cleaner element dirty?
·When the air-cleaner element is dirty ,cleaning it.
4-3. Engine Oil Inspection
·Is the engine filled with the recommended engine oil, and is
the oil dirty?
·If there is not enough oil, if it is dirty, or it has been used
long than the specified time, adding or changing the engine oil.
4-4. Inspection the Tightness of all Fastener Screw
·Are all the screw tight?
·Be sure to check the screw used to fasten the muffler
(Do this when the muffler is cold)
4-5. Fuel and Oil Leaks Inspection
·Are there any fuel or oil leaks? If any are found have a repair
To Next Page
Loading...