J
Julie CalhounAug 6, 2025
Why does my LauraStar Iron make a popping sound when switched on?
- MMarie CookAug 6, 2025
The popping sound your LauraStar Iron makes when switched on is normal!
To Next PageTo Next PageWhy does my LauraStar Iron make a popping sound when switched on?
The popping sound your LauraStar Iron makes when switched on is normal!
Why does the green light keep switching on and off on my LauraStar EVOLUTION G4?
The green indicator light switching on and off during operation of your LauraStar Iron is normal!
Place the appliance on a level, stable, and fireproof base, avoiding chairs or sofas.
Your appliance is designed for tap water; avoid perfumed, rainwater, distilled, or softened water.
Dip a water hardness test strip for one second and read the result after one minute.
Unscrew the water filter, fill it with filter granules, and reassemble.
Fill the cold water reservoir. Using the boiler when empty invalidates the guarantee.
Connect the mains plug, switch on, and wait for the ready indicator light to illuminate.
Adjust the temperature setting according to the fabric type for optimal ironing.
Attach the special soleplate for delicate fabrics or dark materials as required.
Release steam bursts before ironing to remove condensed water.
Use steam intermittently for specific ironing tasks.
Refill the cold water reservoir when the beep and red light indicate low water.
Switch off the appliance, remove the mains plug, and secure the iron.
Allow the appliance to cool completely before storing the steam hose and cable.
Rinse the boiler when cold and switched off, taking precautions against burns.
Clean the outside with a soft, damp cloth; avoid solvents or oil.
Change the AQUA filter granules when they turn completely brown.
Clean the cold water reservoir manually or in a dishwasher.
Clean blocked steam holes in the soleplate using appropriate tools.
Use a specific cleaning cloth and clean more often when using starch.
Activate steam button 2-3 times before ironing or after breaks to release condensed water.
Hang garments and release short steam bursts up and down the fabric.
Pass the steam iron 10 cm above fabric, lift, shake, then smooth by hand.
Iron with steam 2-3 cm from fabric, smoothing by hand.
Steam iron silk; use SOFTPRESSING soleplate for dark colors or delicate materials.
Troubleshoot issues related to beep sounds and red indicator lights, checking water levels.
Address soleplate drips by checking if the boiler was rinsed.
Check for condensate after long ironing breaks.
Understand indicator light behavior for normal operation and SOFTPRESSING soleplate use.
Troubleshoot lack of steam by checking cold water reservoir and system status.
Understand popping sounds and intermittent green light as normal operation.
Switch off, unplug, note serial number, and have receipt/warranty ready.
Call LAURASTAR consumer services and follow their instructions for assistance.
Includes immediate unplugging, steam direction, appliance operation by supervised individuals, and boiler care.
Connect to earthed socket, avoid wet hands/cables, do not pull cable, and do not use damaged cords.
Do not open or repair yourself; check/service steam outlets only when cold and unplugged.
Use caution when attaching hot SOFTPRESSING soleplates and place on heat-resistant rest.
Position hoses to prevent tripping; keep filter granules away from children.
Do not leave iron unattended, use only inside, avoid damaging cables, and never operate without water.
Clean externally with damp cloth; dispose of appliance responsibly, not with household waste.
General| Type | Steam Generator Iron |
|---|---|
| Power | 2400 W |
| Steam Output | 120 g/min |
| Water Tank Capacity | 1.2 L |
| Heating Time | 2 min |
| Soleplate Material | Ceramic |
| Boiler Power | 1400 W |
| Total Power | 2400 W |
