Need help?Do you have a question about the Lava ATTILA GN 2/3 and is the answer not in the manual?
Key safety warnings, operating instructions, and waste management information.
Explains the meaning of various LED lights on the control panel for status monitoring.
Guidelines on how to effectively use and preserve the user and maintenance manual.
Information on manufacturer modifications, safety, and food contact compliance.
Highlights critical chapters for safe and proper installation and operation.
Instructions for safely transporting, unloading, and handling the unit.
Guidance on managing packing materials and connecting the condensate water system.
Steps for correctly positioning and leveling the blast chiller using adjustable feet.
Specifies ideal installation locations and minimum required wall clearances for proper operation.
Details on connecting the unit to the power supply, including earthing requirements and precautions.
Essential steps and safety checks before the initial power-on of the blast chiller.
Procedures for daily cleaning of the blast chiller chamber to maintain hygiene.
Instructions for cleaning the temperature probe and the condenser unit for optimal performance.
Specifies user requirements and general safety precautions for operating the equipment.
Caution against placing hot items on or near the equipment to prevent damage.
Step-by-step instructions for performing manual defrosting, including drainage advice.
Guidelines on maximum shelf load capacity and best practices for loading food items.
Explains process time selection methods and how to measure internal food temperature.
Best practices for loading food items to ensure efficient chilling and freezing.
Advice on spacing and positioning pans for optimal air circulation and process efficiency.
Information on recommended conservation times for blast-chilled and deep-frozen food.
Step-by-step instructions for starting blast chilling cycles using core probe or time-based methods.
Overview of the controller's capabilities and explanation of the symbols and LEDs on the panel.
Details the display, buttons, and basic interface functions of the control panel.
Explains how to configure time-based and core probe programs for blast chilling.
Instructions for stopping/starting cycles, handling warning messages, and general operational warnings.
Lists common alarms and details compressor operational settings and parameters.
Explains compressor protection times and provides a detailed table of adjustable operational parameters.
Outlines recommended periodic checks and procedures for substituting fan motors or compressors.
Instructions on the proper disposal of materials and refrigerants according to regulations.
Information needed when requesting replacement parts for the unit.
A guide to identifying error messages and their corresponding solutions for troubleshooting.
To Next Page
General