33
TECHNICAL SPECIFICATIONS
• Nominal Voltage - Power Rating - Power Supply:
See label on the appliance
• Measurements: Height Width Depth
200 mm 100 mm 100 mm
• Weight: about 0,85 kg
• Milk container: Max 180 ml
• Housing materials: Thermoplastic
• Cable Length: 0,6 m
Problem encountered Possible causes Solution
Milk leaking from the
milk frother.
» Excessive milk amount. » Observe the levels indicated for the
type of preparation.
The milk has not been
heated, it remained
cold.
» Multifunction button
pressed incorrectly.
» Milk frother damaged.
» Make sure not to keep the
multifunction pressed for 3 seconds.
» Contact Lavazza’s Customer Service.
Too hot or burnt milk. » Incorrect quantity of
milk.
» Milk frother damaged.
» Make sure you have not used an
amount of milk below the MIN level.
» Contact Lavazza’s Customer Service.
The milk frother is
noisy.
» Components installed
incorrectly.
» Presence of foreign
bodies.
» Make sure to have inserted the whisk
correctly.
» Make sure that the lid is properly
fitted into place.
» Make sure the appliance is positioned
on a stable surface.
» Make sure no foreign body is present
inside the milk frother.
» Make sure there are no foreign bodies
between the base and the milk frother
that prevent proper operation.
Cold beverage
preparation failed.
» Multifunction button
operated incorrectly.
» Milk frother damaged.
» Make sure to press and holed pressed
the multifunction button for 3
seconds.
» Contact Lavazza’s Customer Service.
Preparation stops
shortly after starting.
» Too hot milk frother.
» Warm milk used.
» Milk frother damaged.
» Rinse the glass with cold water and
pour cold milk.
» Do not reuse with milk already heated.
Use cold milk.
» Contact Lavazza’s Customer Service.
TROUBLESHOOTING
To Next Page
Loading...
