Why my LAVAZZA BLUE LB 300 CLASSY MINI Coffee Maker does not switch on?
If your LAVAZZA Coffee Maker does not switch on, ensure it is properly plugged into a working electrical outlet, not a multiple outlet or power strip. Also, verify that there is power available from the outlet.
What to do if my LAVAZZA BLUE LB 300 CLASSY MINI leaks water from the front?
If your LAVAZZA Coffee Maker is leaking water from the front, the capsule might be stuck. Try raising and lowering the capsule loading lever. Also, ensure you are using Lavazza or compatible capsules and that the capsule/drip collection tray is correctly inserted and not full.
What to do if one of the buttons on my LAVAZZA Coffee Maker does not work?
If one of the dispensing buttons on your LAVAZZA Coffee Maker is not working and the related LED is off, power down the machine by removing the power plug for 10 seconds, then plug it back in. Switch on the machine and check for correct operation of the buttons.
Why is the coffee from my LAVAZZA BLUE LB 300 CLASSY MINI Coffee Maker cold?
If the coffee from your LAVAZZA Coffee Maker is cold, it could be due to dispensing in drips or a clogged hydraulic circuit. Try carrying out the machine washing cycle. Also, the machine might have a lot of limescale, so perform a descaling cycle.
What to do if my LAVAZZA Coffee Maker leaks water from the rear?
If your LAVAZZA Coffee Maker is leaking water from the rear, ensure the tank is correctly inserted and check it for any leaks or damage.
What does it mean when both dispensing button warning lights are quick flashing white on my LAVAZZA BLUE LB 300 CLASSY MINI Coffee Maker?
If your LAVAZZA Coffee Maker shows both dispensing button warning lights quick flashing white, the capsule collection tray is full. Empty the tray and press a button to reset the machine.
Why is my LAVAZZA BLUE LB 300 CLASSY MINI Coffee Maker so noisy?
If your LAVAZZA Coffee Maker is making unusual noises, first, check that the surface it's resting on is stable. Then, make sure all mobile parts are correctly inserted. Also, ensure that the water tank is filled with cool, potable water and that a Lavazza or compatible capsule is inserted.
What to do if my LAVAZZA BLUE LB 300 CLASSY MINI Coffee Maker does not dispense coffee?
If your LAVAZZA Coffee Maker is not dispensing coffee, make sure the water tank is filled with cool, potable water and correctly inserted. If these are fine, repeat the machine start-up procedure to ensure proper priming.
How to fix LAVAZZA Coffee Maker capsule loading lever?
If the capsule loading lever on your LAVAZZA Coffee Maker requires excessive force or won't close, the drip/used capsule collection tray might be full. Empty the tray. Also, ensure the capsule is correctly inserted by raising the lever and re-inserting the capsule properly.
Why does coffee come out in drips from my LAVAZZA Coffee Maker?
If the coffee from your LAVAZZA Coffee Maker comes out in drips, replace the capsule with a new one, as the current one might be defective. Check for abnormal machine noise, which could indicate a pump issue. You can also try running a few dispensing cycles without a capsule to clear any clogs. Descale the machine.
General| Brand | LAVAZZA |
|---|---|
| Model | BLUE LB 300 CLASSY MINI |
| Category | Coffee Maker |
| Language | English |
Covers manual scope, messages used, addressees, and storage guidelines.
Explains how to switch off the machine and place it in standby mode.
Details safety devices like thermal protectors and fuses.
Highlights residual risks if safety rules are not followed.
Provides precautions for safe handling and transport of the machine.
Specifies the recommended conditions for storing the machine.
Provides instructions for end-of-life disposal according to regulations.
Details machine model, identification, dimensions, and weight.
Lists technical specifications like voltage, power, and capacity.
Identifies and labels external components of the machine.
Identifies and labels internal components of the machine.
Instructions for safely unpacking the machine and disposing of packaging.
Offers recommendations for optimal and safe positioning of the machine.
Details the step-by-step procedure for starting up the machine.
Explains how to adjust and set the desired amount of dispensed product.
Details the procedure to reset programmed doses to factory defaults.
Provides a step-by-step guide for descaling the machine to remove limescale.
Offers recommendations and procedures for regular cleaning of the machine.
Lists common problems, their possible causes, and solutions.
Details the methods for disconnecting various types of electric wiring on the machine.
Explains how to disconnect different types of hydraulic pipes and connections.
Guides on removing the drip tray, used capsule drawer, and water tank.
Details the procedure for removing the dispensing spout.
Explains how to remove the side panels of the machine.
Provides steps for removing the rear panel of the machine.
Details the process for removing the user interface assembly.
Guides on how to remove the top cover of the machine.
Step-by-step instructions for disassembling and removing the pump.
Details the process for removing the 2-way solenoid valve.
Guides on how to remove the flowmeter component.
Explains how to extract the water tank inlet valve.
Provides instructions for removing the thermoblock and temperature probe.
Details the procedure for removing the power cable.
Guides on extracting the dispensing unit.
Explains how to extract the CPU board, including disconnecting cabling.
Presents the electrical wiring diagram of the machine with component key.
Presents the hydraulic diagram of the machine with component key.
To Next Page