LAVAZZA Blue LB 2000 User Manual (English)

Questions and Answers:

B
Beth WilsonAug 2, 2025
What to do if my LAVAZZA Blue LB 2000 Coffee Maker does not detect water flow?
- J
  Jason MillerAug 2, 2025
  If your LAVAZZA Coffee Maker isn't detecting water flow, several issues could be the cause. It could be due to a broken CPU card, a short circuit or broken temperature sensor, a hydraulic circuit tube that is interrupted, clogged, or disconnected, an occluded unit, a solenoid valve that is occluded or broken, a damaged or interrupted pump, a pump thermal switch that is off, a heating unit occlusion, a broken power card (TRIAC), a non-functioning command from the CPU card, or a completely discharged CPU card battery. You should check the coffee temperature sensor, the hydraulic circuit, the unit, the solenoid valve, the pump and its thermal switch, the heating unit, the power card, and the CPU card.
A
arroyokeithAug 7, 2025
Why capsule doesn't fall into dispenser unit of my LAVAZZA Coffee Maker?
- D
  Derrick WebbAug 7, 2025
  If the capsule doesn't fall into the dispenser unit of your LAVAZZA Coffee Maker after selecting a product, the capsule may be deformed or not up to standard, so replace it with a new one. Alternatively, the release unit mechanism might be broken or blocked. Other potential causes include a broken triac on the power card, a broken CPU card, or interrupted wiring.
S
Sarah BarrAug 13, 2025
How to fix a jammed dispenser unit on LAVAZZA Blue LB 2000 Coffee Maker?
- R
  Rhonda Smith DVMAug 13, 2025
  If the dispenser unit on your LAVAZZA Coffee Maker is jammed or blocked, it might be due to a capsule being blocked on the dispenser unit. Alternatively, the previous capsule may not have been ejected properly, so check the ejection mechanism. Gears that are blocked or sticking may also be the cause, so you should check the gears.
N
Nicole BassAug 19, 2025
What to do if LAVAZZA Blue LB 2000 exceeds maximum torque value?
- B
  brian25Aug 20, 2025
  If your LAVAZZA Coffee Maker exceeds the maximum torque value, the dispenser unit may have exceeded the rest position without stopping. Another possibility is that both micro switches were activated at the same time. Also, the dispenser unit might be badly mounted. It is recommended to check the dispenser unit, the micro switches, and the mounting of the dispenser unit.
R
Rodney WhiteAug 26, 2025
Why working micro switch is activated early on my LAVAZZA Blue LB 2000?
- B
  Brandy AndersonAug 27, 2025
  If the working micro switch is activated when the unit of your LAVAZZA Coffee Maker is going into working position, the dispenser unit may have exceeded the dispenser position without stopping. Another possible cause is a broken or disconnected working micro switch. Also, there might be inverted wiring on the motor of the gear motor. Check the dispenser unit and the working micro switch.