Figure4
1.Higherhandleposition2.Lowerhandleposition
Note:Torqueallboltsto120in-lb(13.6N·m).
2.Removethetwoscrewsthatholdthebackcoverin
placeandremovethebackcover(
Figure5).
Figure5
3.Routethebladebrakecablearoundtheoutsideof
thehandleandattachthecableend(Figure6).
Figure6
1.Bladebrakecable
3.AttachcableZ-ttingend
here
2.Insertcablejacketend
here
4.Throttlecable
4.Ensurethatthebladecontrolbarisproperly
adjusted.RefertoAdjustingtheBladeControlin
theMaintenancesection.
5.Routetheself-propeldrivecablearoundtheoutside
ofthehandle,threadthecablethroughtheopening
onthelefthandsideofthehousing,andattachthe
cableend(Figure7).
Figure7
1.Self-propeldrivecable
3.Attachcableendhere
2.Insertcablejacketend
here
6.Ensurethattheself-propeldriveisproperlyadjusted.
RefertoAdjustingtheSelf-propelDriveinthe
Maintenancesection.
7.Routethethrottlecablearoundtheoutsideofthe
handle,insertthecablejacketinthecableclamp,
7
To Next Page
