11
OPERATION
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
ADJUSTING THE CUTTING HEIGHT
position (Fig. 7).
and lowest positions.
NOTE: The two adjustment levers MUST be set to the same position (height).
For best performance, align the edge of the cutting blades to overlap the previously cut path. This will
ensure no grass is missed during the process.
NOTE: Do not use wheels as a reference point for grass cut line.
WARNING
Do not allow familiarity with this type of product to make you careless. Remember that a careless
Fig. 7
Height
Adjustment
Lever
To Next Page
Loading...
