LawnMaster LMRM1801 - Adjusting the Mower Blades

14
clearance be readjusted.
cutting bar away from the blades, turn the adjustment screw counterclockwise (Fig. 9).
the blades and the cutting bar, and slowly turn the wheel by hand (Fig. 10).
action.
MAINTENANCE
Adjustment
Screw
Cutting Bar
Fig. 9
Paper
Cutting Bar
Blade
Fig. 10
WARNING
Do not over-tighten the adjustment screw, as this could damage the cutting bar. Tighten both screws
CAUTION