SETTING CUTTING HEIGHT (See Fig. 10)
When shipped, the wheels on the mower are set to a low-cutting position. Bofore using the mower for
the first time, adjust the cutting position to the height best suited for your lawn. The average lawn
should be between 1.35" to 3.35".
To set the cutting height: 6 is highest setting setting 1 is lowest.
To raise the cutting height, grasp the height adjustment lever and move it toward the back of the mower.
To lower the cutting height, grasp the height adjustment lever and move it toward the front of the mower.
ASSEMBLY
15
The mower is designed to disperse the clippings back to the lawn .pull up the cover and insert the
side discharge chute. The side discharge is optional, if you do not need ,you can take it away.
INSTALLING THE SIDE DISCHARGE CHUTE (See Fig. 9)
Fig. 9
Fig. 10
To Next Page
Loading...
